| Sr. # | DescriptionofTopic |
| 1. | Introduction to Laboratory and HSE measures. |
| 2. | To determine the diameter and unit weight of metallic bar. |
| 3. | To determine the yield strength, proportional limit, ultimate strength of steel bars and develop stress-strain relationship. |
| 4. | To determine percentage elongation and percentage reduction in area of steel bar. |
| 5. | To perform the bend test of steel bar. |
| 6. | To determine the shear strength of steel bars. |
| 7. | To determine shear modulus of metals. |
| 8. | To determine poisson’s ratio of metals. |
| 9. | To determine the location of neutral axis in the beam cross-section and compare it with the theoretical value. |
| 10. | To determine bending stress and deflection of simply supported beams. |
| 11. | To determine bending stress and deflection of cantilever beams. |
| 12. | To perform torsional test on steel bars and determine modulus of rigidity. |
| 13. | To perform hardness/toughness test on steel bars. |
| 14. | To determine impact strength of steel bars. |
| 15. | To determine the stiffness of the spring. |
| 16. | To perform an open-ended lab. |
Mechanics of Solids-I (Practical)
By / June 14, 2024