Engineering Mechanics (Practical) - Smart Civil Engineers

S. No	Topics
1.	Introduction to the Engineering Mechanics Laboratory and HSE (Health, Safety and Environment) measures.
2.	To verify the Parallelogram Law of Forces by using Force Board.
3.	To verify the Triangle Law of Forces by using a Force Board.
4.	To verify the polygon law of forces using a Funicular polygon apparatus.
5.	To verify the polygon law of forces using Funicular polygon apparatus.
6.	To verify the first condition of equilibrium using Force Board.
7.	To verify the second condition of equilibrium using meter scale-beam method Board.
8.	To find out the coefficient of friction on horizontal steel plane for various materials.
9.	To find out the angle of static, dynamic friction and the coefficient of friction between various materials on inclined steel plane for various materials.
10.	To find out the angle of static, dynamic friction and the coefficient of friction between various materials on precision friction force apparatus at different speeds.
11.	To verify that the centrifugal force varies in direct proportion to mass of rotating body, square of speed of rotation and the radius of gyration.
12.	To determine the experimental values of the force in the principal parts of the Jib Crane and to see the effect of altering the tie length.
13.	To compare the results of wall Jib crane with the forces obtained from graphical solutions using polygon or triangle law of forces.
14.	To measure the bending moment at a normal section of a loaded beam and to check its agreement with theory.
15.	To measure the shear force at a normal section of a loaded beam and to check its agreement with theory.
16.	To perform an open-ended lab.

Related Posts

Leave a Comment Cancel Reply