Civil Engineering Materials PR

S #

Topic

01

1. Introduction to the “Material Testing Laboratory” and HSE (Health, Safety and Environment) measures.
   To introduce the Civil Engineering Materials which are most commonly used for construction.
   

02

To Determine the Particle Size Distribution of Coarse Aggregates by Sieve Analysis Method and to determine Fineness Modulus of Coarse Aggregates

03

To Determine the Particle Size Distribution of Fine Aggregates by Sieve Analysis Method and to determine Fineness Modulus of Fine Aggregates

04

To determine Specific Gravity and Water Absorption of Coarse Aggregate.

05

To determine the Bulking of Sand.

06

To determine the Efflorescence of a Burnt Clay Brick by Efflorescence test.

07

To determine the “Water Absorption” percent by mass of Burnt Clay Bricks.

08

To determine the Compressive Strength of a Burnt Clay Brick Using Universal Testing Machine (UTM).

09

To determine the Dimension Tolerance Test of a Burnt Clay Brick.

10

To determine the Fineness of Ordinary Portland Cement (OPC) by Sieving Through IS.75 / BS.200 / ASTM.200 Sieve.

11

To determine the Normal Consistency of Ordinary Portland Cement (O.P.C) by Using Vicat’s Apparatus (VA) With Plunger Attachment

12

To determine the Initial and Final Setting Time of Cement Paste by Vicat’s Apparatus With Different Needle Attachment.

13

To determine the Diameter, Unit Weight and Bending of Steel bar.

14

To determine the Yield Strength, Proportional Limit, and Ultimate Strength for Steel Bar.

15

To determine the impact resistance of tiles.

16

To perform an open ended lab