To design a multi-story building using ETABS software. July 4, 2024 To design a multi-story building using ETABS software. Read Post Âģ
Introduction to Laboratory and HSE measures. July 2, 2024 Introduction to Laboratory and HSE measures. Read Post Âģ
To determine the diameter and unit weight of metallic bar. July 2, 2024 To determine the diameter and unit weight of metallic bar. Read Post Âģ
To determine the yield strength, proportional limit, ultimate strength of steel bars and develop stress-strain relationship. July 2, 2024 To determine the yield strength, proportional limit, ultimate strength of steel bars and develop stress-strain relationship. Read Post Âģ
To determine percentage elongation and percentage reduction in area of steel bar. July 2, 2024 To determine percentage elongation and percentage reduction in area of steel bar. Read Post Âģ
To perform the bend test of steel bar. July 2, 2024 To perform the bend test of steel bar. Read Post Âģ
To determine the shear strength of steel bars. July 2, 2024 To determine the shear strength of steel bars. Read Post Âģ
To determine shear modulus of metals. July 2, 2024 To determine shear modulus of metals. Read Post Âģ
To determine poissonâs ratio of metals. July 2, 2024 To determine poissonâs ratio of metals. Read Post Âģ
To determine the location of neutral axis in the beam cross-section and compare it with the theoretical value. July 2, 2024 To determine the location of neutral axis in the beam cross-section and compare it with the theoretical value. Read Post Âģ
To determine bending stress and deflection of simply supported beams. July 2, 2024 To determine bending stress and deflection of simply supported beams. Read Post Âģ
To determine bending stress and deflection of cantilever beams. July 2, 2024 To determine bending stress and deflection of cantilever beams. Read Post Âģ
To perform torsional test on steel bars and determine modulus of rigidity. July 2, 2024 To perform torsional test on steel bars and determine modulus of rigidity. Read Post Âģ
To perform hardness/toughness test on steel bars. July 2, 2024 To perform hardness/toughness test on steel bars. Read Post Âģ
To determine impact strength of steel bars. July 2, 2024 To determine impact strength of steel bars. Read Post Âģ
Fluid Mechanics and Hydraulics (Practical) June 14, 2024 Fluid Mechanics and Hydraulics (Practical) Read Post Âģ
Introduction to Practical contents, Equipment, and HSE (Health, Safety and Environment) measures. July 2, 2024 Introduction to Practical contents, Equipment, and HSE (Health, Safety and Environment) measures. Read Post Âģ
To determine errors in the readings of a Bourdon pressure gauge July 2, 2024 To determine errors in the readings of a Bourdon pressure gauge Read Post Âģ
To determine the metacentric height of floating body. July 2, 2024 To determine the metacentric height of floating body. Read Post Âģ
To investigate the validity of the formulas for resultant force on, and position of center of pressure of a vertical rectangular surface. July 2, 2024 To investigate the validity of the formulas for resultant force on, and position of center of pressure of a vertical rectangular surface. Read Post Âģ
To prove validity of Bernoulliâs Theorem. July 2, 2024 To prove validity of Bernoulliâs Theorem. Read Post Âģ
To determine the Cd for a Venturi meter and To determine the Cd for an Orifice meter.. July 2, 2024 To determine the Cd for a Venturi meter and To determine the Cd for an Orifice meter.. Read Post Âģ
To find the coefficient of velocity for a small orifice. July 2, 2024 To find the coefficient of velocity for a small orifice. Read Post Âģ
To find the coefficient of discharge for a small orifice. July 2, 2024 To find the coefficient of discharge for a small orifice. Read Post Âģ
To investigate relation between head over sill of a rectangular notch and the flow rate through the notch. July 2, 2024 To investigate relation between head over sill of a rectangular notch and the flow rate through the notch. Read Post Âģ
To investigate relation between head over vertex of a v-notch and flow rate through the notch. July 2, 2024 To investigate relation between head over vertex of a v-notch and flow rate through the notch. Read Post Âģ
To determine Chezyâs and Manningâs coefficient (C and N) for a rectangular smooth open channel. July 2, 2024 To determine Chezyâs and Manningâs coefficient (C and N) for a rectangular smooth open channel. Read Post Âģ
To examine quantitative characteristics of hydraulic jump formation on a horizontal floor of a rectangular channel. July 2, 2024 To examine quantitative characteristics of hydraulic jump formation on a horizontal floor of a rectangular channel. Read Post Âģ